Approved for: Cracked and non-cracked concrete C20/25 to C50/60.
Also suitable for: Concrete C12/15.
For fixing of :
The Highbond Anchor FHB II suitable for cracked concrete consists of the Anchor rod FHB II-A L (long version) or FHB II-A S (short version) and resin capsule FHB II-P, FHB II-PF or Injection mortar FIS HB.
The FHB II-PF capsules allow quickest curing e.g. 2 min > 20°.
The capsules FHB II-PF contains quick-setting vinyl ester resin.
The FIS HB injection mortar is a high-strength 2-component vinyl ester mortar.
When using the Injection mortar FIS HB 345 S a special application gun is needed. By using the application gun the two components are mixed and activated in the static mixer.
Anchor rod FHB II-A L
Highest loads due to greater anchorage depth.
Push-through installation by using a push-through element(when using Injection mortar FIS HB).
Anchor rod FHB II-A S
Reduced anchorage depth for use in thin building components, therefore reduced drilling effort.
Suitable for pre-positioned and push-through installation.
Request Data Sheet
Click To Request:
Highbond Anchor FHB II
Anchor Fastner Fixing
Chemical Water Proofing
Waterproofing of Terrace, U.G.Tanks, Basements and Tunnels