Nitocote ET550 is a Thixotropic pitch extended epoxy amine adduct formulation containing reinforcing inert fillers and special blend of solvents.

The product is supplied as a two-component system comprising a special blend ofand epoxy resins and a separate low viscosity amine hardener. Nitocote ET550 is designed to be applied in two coats to achieve a minimum total dry film thickness of 350 microns. To achieve the correct protective properties, must be applied at the coverage rates given overleaf


  • High film build in single application.
  • Easily applied by brush or spray.
  • Provides long term corrosion protection.
  • No priming necessary in most cases.
  • Chemical and abrasion resistant.
  • Economic and versatile product.

Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals. Nitocote ET550 should be removed from tools and equipment with Fosroc Solvent 102 immediately after use. Cured material can only be removed mechanically. Nitocote ET550 and Fosroc Solvent 102 are flammable.Keep away from sources of ignition

Nitocote ET550 provides protection to concrete and metal structures against corrosion from aggressive environments. Suitable for tanks above ground or in totally submerged conditions such as pipelinings. Particularly useful in sewage works, effluent plants and dock and harbour installations.



1.8 – 1.9 m² / litre @ 350 microns DFT.



18 litre packs.

  • Nitocote ET550 should not be applied over existing
  • Application should not be undertaken when the prevailing Relative Humidity exceeds 90%. The surface temperature must be at least 3°C above the dew point at all times to prevent moisture condensation.
  • Nitocote ET550 is not colour stable when exposed to direct sunlight, nor when in contact with some chemicals.