Nitoproof® 100/120

Nitoproof® 100/120 are based on raw materials which are amongst the most water and water-vapour resistant surface coating materials available. They are also resistant to a wide range of chemical attack.
Specially selected bitumens are blended to produce various grades, each designed to provide the best possible protective coating for its practical purpose.
Nitoproof 120 incorporates fibres which give body to the film and act as reinforcement in the coating, eliminating cracking and crazing under conditions of thermal movement.

Note : In common with all bituminous and tar based coatings, and many other organic materials, Nitoproof 100 and 120 are susceptible to prolonged exposure to ultraviolet light and are not, therefore, recommended for use in situations where they will be exposed to direct daylight. They are however, ideally suited for use in sandwich constructions, or as surface coatings in enclosed tanks or structures, or below ground, where their durability is well proven.

Advantages :

  • Easy to use : Simple brush or trowel application.
  • Cold applied :No heating or dangerous handling.
  • Liquid membranes : Can be applied to rough or contoured surfaces.
  • No joints :Continuous unbroken film.
  • Non toxic : Safe with drinking water.

Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.

Horizontal and vertical damp-proof membranes in sandwich construction for floors, walls and roofs.
Internal lining of water storage tanks including for potable water. External treatment of below ground structures against water ingress and attack by aggressive ground water.

The following may be used as a guideline.

Nitoproof 100: 4.0 to 6.0 m2 / litre dependent upon porosity and texure of the substrate ( see section on priming ).

Nitoproof 120: 1.5 to 2.0m2/kg on medium to smooth surfaces first primed with Nitoproof 100 gives dry film thickness approx. 250 microns per coat.

Note : For optimum protection 1 full coat of Nitoproof 100 Primer plus 2 coats of Nitoproof 120 applied in accordance with the above instructions for use and coverage is generally recommended.

Nitoproof 100 is available in 5,20,50 & 200 Ltr Containers.
Nitoproof 120 is available in 73, 15 and 3.75 Ltr Containers.

Summary
Review Date
Reviewed Item
Nitoproof 100/120
Author Rating
51star1star1star1star1star