Nitotile GP

Nitotile GP cementitious powder is available in grey or white colour.

Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.


  • Simple and economical in use.
  • Locally manufactured for use in Middle East conditions.
  • Good open wet time.
  • Good slip resistance.
  • High adhesive bond strength

Nitotile GP is a high quality adhesive for the permanent fixing of ceramic tiles. It can also be used for fixing of insulating and acoustic boards based on expanded polystyrene etc.

Typical uses include :

  • Wet areas – kitchens and bathrooms.
  • Tile claddings.

Instructions for use:

Surface preparation

  • All surfaces must be sound and thoroughly clean before
  • Nitotile GP is applied. All traces of grease or oil must be
  • removed with a chemical degreaser. All loose particles of
  • mortar, old wallpaper, paint etc. must be physically removed.


  • Nitotile GP can be applied directly on concrete, cement
  • screeds, and cement or lime mortar. Special attention must
  • be given to new construction prior to commencing tiling. Tiles
  • should not be placed on concrete or blockwork until all
  • shrinkage movement has taken place.


Nitotile GP : Approx. 3.8 kg/m2@ 2mm.


Nitotile GP : 25 and 5 kg bags.

  • Nitotile GP should be spread on the substrate to a uniform
  • thickness of 2-3mm, and then combed horizontally with a
  • serrated trowel.
  • Place tiles firmly into adhesive bed, ensuring good contact
  • with a twisting motion. Only apply to areas which can be tiled
  • in the adhesive’s open wet time (up to 1m2 at a time).