Proofex Engage is a Pre-applied HDPE waterproofing membrane which mechanically bonds to poured concrete slabs, remaining in place if settlement of substrate occurs.
Proofex Engage is a unique patented system comprising a complex cell mesh bonded to a polyethylene membrane which allows poured concrete to interlock with the membrane forming a tenacious mechanical bond.
Proofex Engage is supplied with a selvedge on one side to provide sealed laps.
Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.

Uses and advantages 

  • Basement waterproofing protection to grades 2, 3 and 4 as defined in BS8102:1990.
  • To provide a vapour and waterproof membrane in building and civil engineering structures.
  • Resistant to attack from chemicals and aggressive ground salts.
  • Forms a tenacious mechanical bond to poured concrete remaining in place if settlement of the substrate occurs.
  • Simple application – no primers or protection material required.
  • Inert product – no risk of a reaction with ponded wate prior to concrete being poured.
  • Durable – withstands inclement weather and resistsconstruction related damage. Can be trafficked immediately after application.
  • Facilitates flexible construction programming.
  • Full range of Fosroc hydrophilic and PVC waterstopsavailable to provide complete solution to waterproofing of the structure.

Ancillary products 

Proofex LM 
A two component applied liquid membrane for sealing around intricate details such as pipe entries, penetrations, pile caps, etc.

Proofex Engage Detail Strip 
A reinforced, double sided waterproof adhesive tape for sealing and jointing roll ends, cut edges and wall to floor detailing, sold in packs of two. It consists of a strong synthetic fibre fabric impregnated and coated both sides with a bitumen rubber adhesive. Each side of the tape is protected by a removable plastic film.

Proofex LM Mesh 
A reinforced mesh used in conjunction with Proofex LM for areas of extreme loading (covings, edges and pipe penetrations).

Proofex Engage 

Thickness : 4 to 5mm.
(0.8mm excluding grid section).
Roll width : 1.27m.
Roll length : 30m.
Edge laps : 68mm.
End lengths : Butt jointed.
Roll weight : 58kg.

Proofex Engage Detail Strip 

Thickness : 1.5mm.
Roll width : 200mm.
Roll length : 10m.
Roll weight : 4kg.
Pack weight : 4kg..

Proofex LM 

Average thickness: 3.3mm.
Pack size : 28kg.
Coverage at 4 mm thick : 7m².

Proofex LM Mesh 

Width : 100mm.
Length : 50m.