Colpor® 200 cold applied, two part polyurethane sealant is designed for joints in concrete paved areas. Colpor® 200 is a two -component cold applied, high performance, pavement joint sealant, conforming to the requirements of BS EN14188-2:2004 and BS5212 Part 1:1990.

The capability of accommodating cyclic movements is retained by Colpor® 200 throughout extremes of temperature conditions.Colpor® 200 is resistant to fuel, oil and hydraulic fluid spillage, will not harden in cold weather nor become excessively soft or pick up in hot conditions. Colpor® 200 has high durability and long service life which significantly reduces maintenance costs.

Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.

 Advantages :

  • Pitch-free
  • Cold applied – no heating equipment required
  • Fuel, oil and hydraulic fluid resistance
  • Self smoothing (refer to Finishing section)
  • Tough rubbery seal
  • High performance – less maintenance
  • High movement accommodation

For optimum performance, consideration should be given to possibility that movement accommodation will not be evenly distributed between joints provided. In trafficked areas the maximum expansion joint width to be limited to 30mm.Colpor® retains its movement accommodation of 25% on butt joints throughout the extremes of temperature,it does not harden in cold weather nor become excessively soft or pick up in hot conditions.

For sealing and maintenance of norizontal joints in concrete roads, concrete runways and hard standings. The excellent fuel resistance of Colpor 200 makes it particularly suitable for sealing areas where fuel and oil spillage might occur such as:

  • Aircraft fuelling areas
  • Oil terminals
  • Garage forecourts
  • Parking and cargo areas
  • Docks and harbours
  • Warehouses



Colpor 200 comes in 3 litre packs.