Conbextra EP10(M)

Conbextra EP10(M) is resistant to oil, grease, fats, most chemicals, mild acids and alkalis, fresh and sea water. Pot life Ambient temperature affects the time for which bulk material will remain fluid.

Advantages

  • Moisture insensitive.
  • Low creep characteristics.
  • High compressive, tensile and flexural strengths.
  • Fast, convenient pumping with early strength gain.
  • Withstands a wide range of chemicals.

Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.

Conbextra EP10(M) is a two part epoxy resin system for grouting gaps ranging from 0.25mm to 9mm. It is an all liquid system consisting of a base and hardener.

Conbextra EP10 (M) is a two part epoxy resin system for grouting gaps ranging from 0.25mm to 9mm. It is an all liquid system consisting of a base and hardener

  • Moisture insensitive
  • Low creep characteristics
  • High compressive, tensile and flexural strengths
  • Fast, convenient pumping with early strength gain
  • Withstands a wide range of chemicals

Limitations

  • During application

Grouting may be carried out without special precautions at ambient temperatures from 50 to 350C.

  • In service

The cured material is suitable for use from 00C.

Depending on the crack width and depth the distance between nipples should be 200 to 500 mm.

Uses:

  • Conbextra EP10(M) is a two part epoxy resin system forgrouting gaps ranging from 0.25mm to 9mm. It is an all liquid system consisting of a base and hardener.
  • Prepare the surface and seal the cracks with a sealing compound which can also be used for bonding injection nipples. Depending on the crack width and depth the distance between nipples should be 200 to 500 mm.

 

Conbextra EP10(M) : 1.5 litre packs.