Nitobond PC

Nitobond PC thixotropic epoxy adhesive is a 2 pack solvent free epoxy resin system consisting of a white base, black hardener in pre-weighed quantities for easy onsite mixing.

The product is available in three grades :

  • Nitobond PC20 – Fast set for application between 50C to 200 C.
  • Nitobond PC 30 – Medium Fast set for application between 150C to 300C.
  • Nitobond PC40 – Slow set for application between 250C to 400C.

Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.

Bonding segmented concrete bridges to speed up construction and provide a structural and water resistant joint. Can be used for pointing Stone masonry joints to retain structural integrity.


  • Excellent squeezability
  • High bond strength
  • Fast cure
  • Tolerant to damp surfaces
  • Wide range of temperature applications


The mixed adhesive is applied to both surfaces to be bonded with a serrated trowel or other suitable spreader.

The joint should be closed immediately, if this is not achieved the surface of the adhesive should be slightly scratched immediately prior to closing the joint to expose fresh adhesive. The joint must be closed within the open time of the adhesive. On site monitoring of the operation using lapped asbestos cement panels is recommended.



Approximately 2 L/m2 at 2 mm thickness.



30 Ltr. bulk packs and 3.7 L standard packs.