Nitoflor® FC150 is a solvent free system based on epoxy resins and curing agents specially selected for their ability to withstand chemical attack. The system consists of pre-weighed base & hardener components and a Nitoflor colour pack, all of which contain reactive elements that are essential to the installation of the system.
A slip resistant texture can be provided by the use of one of a range of Nitoflor Antislip Grains which have been carefully graded to ensure an even texture.

Advantages

• Durable, low maintenance costs.
• Proven against a wide range of industrial chemicals.
• Solvent free – no odour during application.
• Slip resistant – different textures available to suit conditions to avoid slipping.
• Liquid applied providing complete protection.
• Available in a wide range of colours to improve the working environment and identify slip hazard areas.

Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.

Nitoflor FC150 provides a hard wearing, chemical and abrasion resistant floor finish. It is ideally suited for use in wet areas where a high degree of resistance to chemicals, oils and grease is required such as:

• Dairies.
• Soft drinks production facilities.
• Chemical manufacturing plants.
• Car parks and workshops.

Standard coverage

Nitoflor FC150 (base coat) : 5.0m2/litre @ 200 microns wft.
Nitoflor FC150 (top coat) : 5.0m2/litre @ 200 microns wft.

Coverage – Antislip (approx.)(for medium texture)

Nitoflor FC150 (base coat) : 4.0m2/litre @ 250 microns wft.
Nitoflor FC150 (top coat) : 4.0m2/litre.
Note: Coverage figures given are theoretical – due to wastage factors and the variety and nature of substrates, practical coverage figures may be reduced, this will vary with site and application conditions.

Nitoflor FC150 : 4.5 litre packs (Including colour pack).