Nitomortar PE products are based on a polyester resin system. There are two grades:
Nitomortar PE – for general purpose use.
Nitomortar PE Concrete – a special grade allowing users to add suitable aggregate, thereby substantially reducing the cost of infilling larger voids.

Winter versions of both products are available which are faster setting at low ambient temperatures. Both grades of Nitomortar PE are supplied as two-component products with pre-weighed quantities of liquid resin and powdered hardener, ready for on-site mixing and use. The hardener system enables the mix to be varied from a pourable consistency to a trowellable mortar without significantly affecting the setting times or strengths achieved. This makes the product extremely reliable in use.


  • Durable – Stronger than concrete. Highly chemical and oil resistant. Excellent bond strength.
  • Ease of application – Mix resin and hardener in any proportion as required. No primer is required.
  • Quick – Finish job operation in 2 – 3 hours.
  • Versatile- Can be poured, trowelled, filled with coarse aggregates. Will cure in dry, wet, damp, and under water conditions. Can be used at down to 00C or upto 600C.

Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.


For fast and emergency reinstatement of concrete, bedding, jointing and reprofiling of concrete, masonry and brickwork. Nitomortar PE is ideally suited for the repair and reprofiling of precast concrete units, damaged arrises and treads. It can be used to infill hollows and holes in concrete floors, bedding and fixing kerbstones, manhole sets, frames, brick slips, ceramic tiles, slabs and coping stones. Nitomortar PE Concrete should be used to repair larger voids. The products are especially useful where fast strength gain is important. When properly compacted, they are highly impermeable.




Nitomortar PE Mortar : 5.0 litres/ pack
Nitomortar PE Concrete : 15 to 27.5 litres/5 litre pack(dependent on aggregate addition)



Nitomortar PE Mortar : 5 litre packs
Nitomortar PE Concrete : 5 litre packs