DESCRIPTION
PENEBAR™ PRIMER enhances the bonding between preformed sealants, like PENEBAR™ SW, and concrete surfaces aiding in the installation process. Conveniently applied at the job site.
RECOMMENDED FOR
PENEBAR™ PRIMER should be applied to the substrate by brush prior to installation of PENEBAR™ SW preformed joint sealer.
DIRECTIONS FOR USE
Carefully brush off all dust and debris and brush apply a coat of PENEBAR™ PRIMER to the area where PENEBAR ™ SW preformed joint sealer is to be placed.
PHYSICAL PROPERTIES
Color: Bright Orange
% Solids: 20% minimum
Solvent Type: Water
Flash Point: 200°F (93°C) minimum
Dry Time @ 77°F (25°C): 10 minutes
Dry Time @ 40°F (4°C): 60 minutes
Clean Up: Soap and Water
Coverage per Gallon: Approximately 400 sq ft (37 m²)
on wet cast concrete. Coverage diminishes on dry cast
concrete.
Appropriate Substrates: Concrete, Plastic, Metal
Min. Storage Temperature: 40°F (4°C). Product should
not be allowed to freeze.
Min. Application Temperature: 20°F (-7°C)
Surface when Dry: Tacky
PACKAGING
PENEBAR™ PRIMER is available in 1-gallon (3.8 L) pails.
STORAGE / SHELF LIFE
When stored in a dry enclosed area off the ground at a minimum temperature of 45°F (7°C) in unopened, undamaged pails, shelf life is unlimited.
SAFE HANDLING INFORMATION
Keep out of reach of children.
