PENEBAR SW-45 RAPID Concrete Joint Waterstop
Recommended for building foundations, slabs, retaining walls, storage tanks and other immovable cold construction joints, PENEBAR SW 45 is a unique sealing compound designed to expand rapidly when exposed to water.It is an ideal self-healing joint material for construction joint applications.
DESCRIPTION
PENEBAR™ SW-45 Rapid is a unique
bentonite infused butyl rubber sealing
compound designed to expand rapidly when
exposed to moisture, making it a
self-healing joint material for construction
joint applications.
APPLICATIONS
Building foundations
Slabs
Retaining walls
Storage tanks
Other similar non-moving cold construction
joints
PHYSICAL PROPERTIES
Color : Black
Specific gravity (ASTM D71) : 1.55 ± 0.05
Volatile matter (ASTM D6) : 1% maximum
Penetration, 150 g cone @ 25°C (77°F); 5 sec (ASTM D217) : 40 ± 5 mm
Application temperature range : -23°C to 38°C (-9°F to 100°F)
Service temperature range : -34°C to 82°C (-29°F to 180°F)
DIRECTIONS FOR USE
How to apply PENEBAR™ SW-45 Rapid on poured-in-place
construction joints:
1) Apply PENEBAR™ PRIMER by using brush at a minimum of 0.1 mm
(4 mils) thick by 50 mm (2”) wide over the entire surface length to
receive PENEBAR™ SW-45 Rapid. Allow it to dry for 10-15 minutes
at a temperature of 25°C (77°F) or, where the temperatures are low,
allow it to dry for a longer time.
2) By using the heel of the hand and moderate pressure, press a
bead of PENEBAR™ SW-45 Rapid firmly into position on the
standing structure. Make sure the product has bonded with the
primed area.
3) Where required, splice ends to form a continuous, uninterrupted
seal. For best results, cut each end at opposite 45° angles and tightly
butt ends together. DO NOT OVERLAP ENDS. Gently knead the
spliced ends creating an uninterrupted seal.
4) Peel the protective covering from the exposed side of the installed
PENEBAR™ SW-45 Rapid.
5) Follow standard concrete placing procedures from here onwards.