Plastiseal is a flexible rubber-bitumen joint sealant with excellent slump resistance. For large projects, such as sealing joints in irrigation canals, Plastiseal can be supplied in 180 liter drums for application from the drum by a Graco, or similar, air operated pump.

Advantages:

• Firm flexible weather resistant seal.
• Excellent slump resistance.
• Excellent immersed adhesion.
• Compatible with asphalt or bituminous surfaces.
• Unaffected by alkalis or sulphates.
• Easily gunned.
• Suitable for joints up to 40 mm wide.

Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.

Joint size: Joints should be of a size to permit adequate application of Plastiseal. Very narrow joints are difficult to seal effectively and for most applications 10 mm should be considered the minimum width. Maximum recommended width is 40 mm. A minimum seal depth of 15 mm must always be maintained.
          To ensure that the sealant operates within its stated movement capacity (MAF 10% in butt joints) the sealing slot widths should be designed in accordance with the recommendations of BS 6093.
                The use of Primer 3 is always recommended on porous surfaces. Example of a sealed transverse joint in an irrigation canal (showing longitudinal joint incorporating special canal joint crack inducing waterstop)

Plastiseal is used for:

• Sealing joints in flashings, guttering and sheet laps
• Irrigation channels
• Open water retaining structures
• An integral part of the Proofex waterproofing system

Plastiseal : 400ml cartridges & 25 litre pack