Fosroc Polyurea FLM:Waterproofing: Authorised Super Stockist & Applicator: Aquaproof Anchoring Systems, Pune India

Polyurea FLM

  • polyurea_flm

Fosroc Polyurea FLM is a spray-applied, 100% solids, flexible, two-component, rapid curing pure Polyurea system, designed as a floor protective coating. It combines the advantages of seamless, waterproof coating with very long life cycles and high durability. Polyurea FLM consists of the two components Fosroc Polyurea FLM Part A ISO and Fosroc Polyurea FLM Part B AMINE. The system offers excellent surface properties and overall physical properties.
Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.

  • polyurea_flm

Uses :

Anti-corrosion, protective coating for flooring applications in a wide range of environmental conditions.
Typical applications include:

  • Industrial floors.
  • Processing plants.
  • Food processing areas.
  • Warehousing.
  • Car parks & garages.
  • Stadia.
  • Helipads.
  • Workshops & production facilities.
  • Manufacturing plants.
  • Plant rooms.

Note: Anti-slip and other coating properties may be provided by the introduction of fillers or fibres, provided as a separate component supplied in-situ by modified spray gun. Refer to the Fosroc Polyurea Method Statement, and contact Fosroc for further advice.

  • polyurea_flm
Advantages :
  • Environment friendly – zero VOC.
  • Excellent chemical resistance, thermal stability and UV Resistance *
  • Very fast turn-around time. The coated substrate can be put into service within an hour.
  • Excellent impact, abrasion and puncture resistance.
  • Seamless and monolithic, including field joints.
  • Significantly enhances the durability of reinforced concrete.
  • Low permeability values.
  • Can be applied at ambient temperatures from -30oC ** to +70oC.
  • Designed for service temperatures from -30 oC to +135 oC.

* see Chemical Resistance and Colour sections.
** Note for applications below 5⁰C, e.g in cold storage rooms in service, consult Fosroc for specific advice.

  • polyurea_flm

Supply:

Fosroc Polyurea FLM Part A ISO component
Drums : 200 ltrs.
Fosroc Polyurea FLM Part B AMINE component
Drums : 200 ltrs.
Or Drums : 195 ltrs + separate colour pack.
Fosroc Nitoprime 31 Part A Base
Tin container : Fosroc Nitoprime 31 Part B Hardener
Tin container :
Fosroc Primer 195 Part A Base
Pail : 12.5kg in 25 litre pail.
Fosroc Primer 195 Part B Hardener
Pail : 7.5kg in 10 litre pail.

Coverage:

Fosroc Nitoprime 31/Fosroc Primer 195: see Priming section and refer to Fosroc Polyurea Method Statement.
Fosroc Polyurea FLM : 1.5 – 3.0 ltrs per m2 *depending on specification.

* Note:
Normal recommended coverage is 2.0 litres/m2.
1.5 litre/m2 coverage rate is the absolute minimum and requires a highly experienced operator for even and effective coverage, using a cross-hatch spray pattern.
3.0 litres/m2 rate is the maximum coverage rate for a single coat application.

Companies