Fosroc Polyurea WPE: Waterproofing: Authorised Super Stockist & Applicator: Aquaproof Anchoring Systems, Pune India

Polyurea WPE

  • polyurea_wpe

Fosroc Polyurea WPE is a self levelling 100% solids, flexible two component, rapid curing Polyurea coating.
It consists of the two components Fosroc Polyurea ISO WPE and Fosroc Polyurea AMINE WPE. It offers excellent surfaces and good overall physical properties.
The WPE series is a pure Polyurea formulation designed as a waterproofing and protective coating. It offers short reaction time of 8 sec. It combines advantages of seamless film with very long life cycles and high durability.
Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.

  • polyurea_wpe

Uses 

Anti-corrosive, waterproof and protective coating for concrete and steel in a wide range of environmental conditions.
Typical applications include :

  • Below grade waterproofing.
  • Pipe/Pipeline coating.
  • Bridge/Bridge deck waterproofing.
  • Tank coating.
  • Water & waste water tank lining.
  • Marine environment.
  • Roof waterproofing.
  • Truck bed liner.
  • Theme parks & decorative designs.
  • Aquarium lining.
  • Landscape & water containment.
  • Waterparks & playgrounds.
  • Rail car.
  • Line striping.
  • Secondary containment.
  • Airports.
  • Refineries.
  • polyurea_wpe

Advantages

  • Environment friendly – zero VOC.
  • Excellent chemical resistance, thermal stability and UV resistance.
  • Very low turn-around time. The coated substrate can be put in to full service within one hour.
  • Strong impact, abrasion and puncture resistance.
  • Seamless and monolithic, including field joints.
  • Significantly enhances the durability of reinforced concrete.
  • Low permeability values.
  • Can be applied at ambient temperatures between -30°C to 70°C.
  • Designed for service temperature from -30°C to 135°C.
  • polyurea_wpe

Supply:

Fosroc Polyurea WPE Clear : 400 ltrs.
Part A : 200 ltrs
Part B : 200 ltrs

Fosroc Polyurea WPE Coloured : 400 ltrs.
Part A : 200 ltrs
Part B :195 ltrs + colour pack

Coverage:

Fosroc Polyurea WPE : 1m2/litre @ 1000 microns wft per coat
Note : The coverage figure is theoretical – due to wastage factors and the variety and nature of substrates, practical coverage figures may be reduced.

Companies