Reebaklens RR  cleaning agent is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear green solution.

Advantages

Rapid action : Safe with metals (except zinc and galvanised steel), wood,glass, plastic and rubber. No corrosive action. Penetrates oiland grease.

Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.

 

Reebaklens RR is used as a rust remover from steel bars prior to encasing in concrete / microconcrete. It can also be used on ohter steel surfaces prior to coating with epoxy systems.

 

Approx. 2.0 – 2.5 m2/L
Note coverage depends on the rusted area and the depth of deposition.

 

 

Reebaklens RR cleaning agent is available in 1, 5 and 20 L containers.

          For rusted metal (iron base)Apply Reebaklens RR with brush for complete wetting of rusted metal surface and allowed to react it for 16-24 hours.After 24 hours, a white layer will appear which will protectfurther corrosion of metal / steel for about 5-7 days. Before applying protective coating, the surface should be wirebrushed and thoroughly cleaned for dust with dry cloth.

Health & Safety instructions :

Reebaklens RR cleaning agent is acid based and shouldbe handled with care. It attacks zinc, aluminium and putty. If in doubt about its effect on a material, test a small area be-fore application.Avoid contact with skin. Rubber gloves and goggles shouldbe worn. Wash spillages with plenty of water. Enclosedareas should be well ventilated. If contact with eyes occur,wash immediately with water and seek medical advice.