Injection Mortar FIS EM

Suitable for:

• Non-cracked concrete.
• Reinforcement bars.

For fixing of:

• Steel constructions.
• Railings.
• Consoles.
• Machines.
• Staircases.
• High racks.
• Wooden Constructions.
• Reinforcement Bards.

• Injection Mortar FIS EM gives Best performance mortar in the shuttle cartridge based on epoxy resin.

• Optimum solution for concrete (anchor rods and reinforcement bars).
• Resin and hardener are stored in two separate chambers and are not mixed and activated until pushed through the static mixer.
• Partially used cartridges can easily be reused by changing the static mixer.
• FIS EM is a 2-component injection system based onepoxy resin.
• Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
• The professional injection cartridges are quick and easy to use with the fischer dispensers.
• Partially used cartridges can be reused, simply by changing the static mixer.

Advantages/Benefits

• Excellent mortar bonding ensures highest loads in concrete.
• Suitable for underwater installations.
• Suitable for diamond drilled holes.
• Expansion-free anchoring allows low axial spacings and edge distances.
• Ergonomic injection guns for quick and easy installation.
• Injection Mortar FIS EM achieves a very high load level for safe use in cracked and non-cracked concrete.
• The low mortar shrinkage allows for a maximum applied load, including in the case of large threaded rod diameters.
• The pure epoxy resin can also be used underwater, thus allowing for use in extreme conditions.
• The high approved temperature resistance of -40°F to +162°F allows for a stable load level, even when subjected to increased temperature demands.
•  Injection Mortar FIS EM has extended open times and is therefore particularly suitable for series installation and rebar connections.

Injection mortar for use in cracked and non-cracked concrete
with:

• Threaded rods FIS A
• Internal threaded anchor RG MI

Ideal for:

• Diamond-drilled drill holes
•  Underwater applications